Product Highlights
- AirFit N20 is incredibly small and lightweight.
- Popular nasal mask to be used with CPAP.
- Only three pieces makes assembly, fitting easy.
- Suitable for people who wear glasses.
- Does not move around when you switch sleep positions
Safety Information
- If any visible deterioration of a system component is apparent (cracking, crazing, tears etc), the component should be discarded and replaced.
- Avoid connecting flexible PVC products directly to any part of the mask that may cause the components to crack or break.
- Do not over-tighten the headgear when fitting the mask as this may lead to skin redness or sores around the mask cushion.
- Do not iron the headgear as the material is heat sensitive and will be damaged.
- Disassemble the pillows from the frame according to the disassembly instructions.
- Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap.
- Use a soft bristle brush to clean the vent.
- Inspect each component and, if required, repeat washing until visually clean.
- Rinse all components well with drinking quality water and allow to air dry out of direct sunlight.
- When all components including the vent are dry, reassemble according to the reassembly instructions.
Directions of Use
- Should be used only under the supervision of a medicinal practitioner.
- Hold the pillows at your nose, ensuring that the pillow size indicator is on the bottom and you can see the left (L) and right (R) orientation indicators.
- Stretch the lower strap around the back of your head. The top strap should sit comfortably on top of your head.
- Pull the headgear over your head by holding the lower strap.
- Move the mask away from your face, and then place it back again. Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
- Finally, connect the end of the mask’s tube into your device’s air tubing.
- If adjustment is needed, simply spread the upper and lower straps apart to loosen, or draw them closer together to tighten. Turn on your device as instructed by your doctor.
Accessories
- DreamStation Auto Machine
- Hose
- Dark Blue Reusable Filter (Installed)
- Light Blue Disposable Filter (Uninstalled)
- 80W Power Supply
- Power Cord
- User Manual
- Carry Bag
Expert's Advice
AirFit P10 pillow mask is specifically designed with QuietAir™ woven-mesh vent technology which makes this the quietest mask yet, promoting patient acceptance, offering the comfort of a better night’s sleep.
