Rossmax Blood Pressue Monitor X5 BT

• Wait 5 minutes before taking the next measurement.
• Press the User-Switching key to select memory zone 1, memory zone 2, or guest mode. After a memory zone is selected, press the on/off /start key to reset the monitor so it can start measurement in the chosen memory zone.
• Press the on/off /start key. All digits will light up, checking the display functions. The checking procedure will be completed in 2 seconds.
• After all symbols appear, the display will show a blinking “0”. The monitor is ready to measure and will automatically inflate the cuff slowly to start measurement.
• When the measurement is completed, the cuff will exhaust the pressure inside. Systolic pressure, diastolic pressure, and pulse will be shown simultaneously on the LCD screen. The measurement is then automatically stored into the pre-designated memory zone.
• In order to enhance the probability of pulse arrhythmia detection by the PARR technology, measurement repetitions are recommended. This blood pressure monitor will re-inflate automatically to higher pressure if the system detects that more pressure is needed to take a blood pressure measurement.

Note:

• This monitor automatically switches off approximately 1 minute after the last key operation.
• To interrupt the measurement, simply press the on/off /start key; the cuff will deflate immediately.

Rossmax X5BT upper arm blood pressure monitor is suitable for individuals with high and low blood pressure, offering convenient monitoring at home.